CognitiveTPG C Series Manual de usuario descargar pdf (Pagina 18)

Chapter 2: Getting Started

Press the Power Switch to OFF and conrm the Power and Ready Light turn o before

proceeding to the next steps. Refer to Figure 2-12 in step 1 of the Power Test section of

this manual to locate the power button on the printer.

NOTE: POWER OFF THE PRINTER BEFORE PROCEEDING.

Thermal Transfer Ribbon Loading (TT Printers Only)

To run the C Series printers in thermal transfer mode, a ribbon must be loaded properly

into the C Series printer in order to print. This section details step-by-step instructions on

how to load thermal transfer ribbon into the printer. There is a ribbon loading label on

the side of the printhead mechanism for all thermal transfer C Series printers as shown

in Figure 2-19 below.

Figure 2-19: Ribbon Loading Label

1) Lift the top hinged dust cover.

Figure 2-20. Lifting the Dust Cover

Remove the Test Sample from inside the printer, and le the test sample with the

warranty and other C Series documentation for future reference.

For ribbon specications and details please refer to the

Consumables Guide.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 89 90

Sin comentarios

CognitiveTPG C Series Manual de usuario Pagina 18