CognitiveTPG A799 Manual de instrucciones Pagina 26
- Pagina / 142
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
Chapter 3: Programming the Printer26
Revision D 12/09
A799-PG00001D
Character appearance
The appearance of text can be changed using the following print modes:
• Standard
• Compressed
• Double-high
• Double-wide
• Upside-down
• Rotated
• Underlined
• Bold
• Reverse
• Italic
• Strike-through
• Scaled
• Shading
Width specications
Standard
• Characters per inch: 15.6
• Characters per line: 44
• Cell size: 13 X 24 dots
Print zones
Print zones for 80mm paper
Specications of print zone for 80mm paper:
Compressed
• Characters per inch: 20.3
• Characters per line: 56
• Cell size: 10 X 24 dots
• 576 dots (addressable) @ 8 dots/mm,
centered on 80mm
• Standard mode: minimum margins:
2.0mm (.079 inches)
• Top margin to manual tear-off:
17.8mm (0.70 inches)
• Top margin to knife cut:
19.0mm (0.75 inches)
Note: The application centers 44 standard character cells (13 X 24 dots), or 56 compressed character cells (10 X 24
dots), or 576 addressable bits of graphics across an 80mm wide receipt. Minimum print line height is 24 dots for text or
graphics. Standard print line spacing is 27 dots (i.e., 3 extra row dots).
The A799 adds a 27 dot high font, so standard print spacing is 30 dots.
- Programming Guide 1
- Contents 3
- 4 Revision D 12/09 4
- 6 Revision D 12/09 6
- 8 Revision D 12/09 8
- A799 Programming Guide 10
- Chapter 1: About this Guide 10
- 10 Revision D 12/09 10
- A799-PG00001D 10
- Start-up Diagnostics 11
- Runtime diagnostics 12
- Remote diagnostics 12
- Indicators 14
- Printer conguration 15
- Conguring the printer 16
- Communication interface 17
- Diagnostic modes 18
- Printer emulations 19
- Overview of commands 23
- Comparison to A793 23
- functionality (ColorPOS 24
- Note: The new TPG LogoEZ 25
- Character appearance 26
- Print zones 26
- Rotated printing commands 27
- Emulation modes 28
- Commands listed by function 29
- Text characteristics 30
- Graphics 31
- Real time 32
- Unsolicited status mode 32
- Bar codes 32
- Command conventions 35
- Command descriptions 35
- Perform full knife cut 36
- Perform partial knife cut 36
- Generate tone 36
- Initialize printer 37
- Set current color 39
- Select cut mode and cut paper 39
- Set paper type (ColorPOS 40
- Print test form 41
- Print and paper feed 42
- Add n extra dot rows 43
- Print and feed paper 44
- Print and feed n lines 44
- Horizontal tab 45
- Set column 45
- Set vertical line spacing 47
- Set horizontal tab positions 47
- Set relative print position 48
- To move to the left: 48
- Select justication 49
- Set left margin 49
- Set printing area width 50
- Text characteristics commands 51
- Select pitch (column width) 52
- Select print mode 53
- 54
- Cancel user-dened character 56
- Select or cancel italic print 57
- Select character size 60
- Set smoothing 61
- Select font ID number 62
- Select font style number 62
- Download font 63
- Download font list 63
- Select bit image mode 65
- Select the current logo 67
- Dene downloaded bit image 68
- Print downloaded bit image 69
- Print raster graphics 69
- Download logo image (ColorPOS 71
- Print Flash Logo 71
- Dene Flash Logos 71
- Logo print with knife cut 76
- Set LogoEZ 77
- colorization 77
- attribute mapping 79
- Enable constant speed logos 81
- Status command introduction 82
- Batch mode 82
- Transmit paper sensor status 83
- Transmit printer ID 84
- Transmit status 87
- Send printer software version 88
- Real time commands 89
- Moving data through the buer 90
- Real time status transmission 90
- Real time request to printer 93
- Real time commands disabled 94
- Select bar code height 99
- Print bar code 99
- Print multiple barcodes 101
- 29 107 n d1... 00 102
- 29 107 m nL nH d1... dn 102
- Select bar code width 104
- Sample symbol description: 104
- Page mode 105
- Select page mode 106
- Select standard mode 107
- Set print area in page mode 108
- Execute macro 110
- User data storage 111
- Erase user ash sector 114
- User storage status (ColorPOS 115
- Flash download 116
- Get rmware CRC 117
- Return microprocessor CRC 117
- Return main program ash CRC 118
- Erase selected ash sector 118
- Ethernet setup commands 119
- Setting the Gateway 120
- Setting raw TCPIP port 9001 120
- LP Daemon 120
- Telnet Daemon 120
- DHCP (auto-conguration) 121
- Inactivity timeout 121
- Keep-alive pings 121
- Revision D 12/09 122
- Appendix A: 123
- Appendix B: 129
- Resident Character Sets 129
- Code page 737 (Greek) 130
- Code page 850 (Multilingual) 131
- Code page 852 (Slavic) 132
- Code page 857 (Turkish) 133
- Code page 860 (Portuguese) 135
- Code page 862 (Hebrew) 136
- Code page 865 (Nordic) 138
- Code page 866 (Cyrillic) 139
Relacionado con productos y manuales para Impresión y escaneo CognitiveTPG A799
(2 paginas)© 2020, manymanuals.es. Todos los derechos reservados | 0.046 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales