CognitiveTPG A798 Manual de instrucciones descargar pdf (Pagina 64)

Chapter 4: Programming Commands64

Revision C 12/09

A798-PG00001C

Print downloaded bit image

ASCII GS / m

Hexadecimal 1D 2F m

Decimal 29 47 m

Value and range of m:

This command is used to print a previously stored monochrome or color logo from printer memory on the receipt station.

The logo is identied as the one indicated by the most recent select current logo command or 0 if a select current logo

command has not yet been given. Parameter m is interpreted as follows:

Value of m Print mode Vertical DPI Horizontal DPI

0 Normal 203 203

1 Double wide 203 101

2 Double high 101 203

3 Quadruple 101 101

The indexed downloaded bit image from RAM or ash will be printed on the receipt station at a size specied by m. If

doubling or quadrupling exceeds the print paper width maximums (576 or 640 with 82.5mm paper) the left side of the

image is printed and the bits to the right of the maximum column are discarded. If the available width is greater than the

bit image, its printing will adhere to any currently set right, left, or center justication. This command is ignored if the

index refers to an undened logo/ bit image.

Convert 6-dots/mm bitmap to 8-dots/mm bitmap

ASCII US EOT n

Hexadecimal 1F 04 n

Decimal 31 04 n

Value: 0 = O

1 = On

(When 0 and 1 are the LSB)

Default: 0 (O)

Selects or cancels 6-dot/mm emulation mode.

When the 6-dot/mm emulation is selected, logos and graphics are expanded horizontally and vertically during download

to emulate their size on a 6-dot/mm printer. The horizontal positioning commands also emulate positioning on a 6-dot/mm

printer.

1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 120 121

Sin comentarios

CognitiveTPG A798 Manual de instrucciones Pagina 64